User guide

3 Copy

Displays the [Reduce/Enlarge] screen. For more information, refer to

[Reduce/Enlarge]

Screen on page 50

[Reduce/Enlarge] Screen

Provides additional reduction/enlargement options.

NOTE: The options displayed on this screen vary depending on the selected paper

size series.

Proportional %

• Text box - Allows you to enter a

desired reduction/enlargement

ratio using the scroll buttons. You

can also enter the value by

touching the text box and using

the numeric keypad on the control panel. The value can be specified within the

range of 25-400% in 1% increments.

• 100% - Copies at the same size as the original document.

• Auto % - Automatically reduces/enlarges the image of the document to fit on the

paper size selected.

• Presets - Allows you to select from seven preset enlargement/reduction ratios. The

presets are set up by the System Administrator.

Independent X - Y %

Allows you to specify a reduction/enlargement ratio individually for the width and length

within the range of 25-400% in 1% increments.

• Width - X%, Length - Y% - Allows you to enter the desired reduction/enlargement

ratios for the width and length using the scroll buttons. You can also enter the values

by touching the text boxes and using the numeric keypad on the control panel. The

values can be specified within the range of 25-400% in 1% increments.

• Lock X - Y% - Specifies the same ratio adjustment for the width and length at the

same time.

• Width:100%, Length:100% - Sets the reduction/enlargement ratio of both the width

and length to 100%.

• Auto - Automatically specifies the reduction/enlargement ratio individually for the

width and length to fit on the paper.

• Copy All X - Y% - Enables the [Auto] feature, and reduces the image of the

document slightly from the reduction/enlargement ratio to copy the complete image

of the document onto the paper.

• Width:50%, Length:100% - Sets the reduction/enlargement ratio of the width to 50%

and that of the length to 100%.

NOTE: The above options are displayed when the paper size series is set to [A/B

Series]. When [Inch Series] or other paper size series is selected, the options

displayed will be different. For information on how to change the paper size series,

refer to the Setup chapter in the System Administration Guide.

NOTE: When [Auto %] is selected, Tray 1 is automatically selected, even when [Auto

Paper Select] is selected in [Paper Supply].