Specifications

8 Accounting and Securities
72
Resetting the Total Number of Copies and Prints for All Users
The following describes how to reset the copy and print totals for all user accounts in a
single operation.
At the Machine
1. Enter the System Setting Mode.
The letter [P] appears blinking in the Display.
NOTE: For information on how to enter the System Setting Mode, refer to
Entering the
System Setting Mode on page 109
.
2. Enter a menu number [398] using the numeric keypad.
3. Press the <Start> button to confirm the entered menu number.
4. Enter “0” using the numeric keypad.
5. Press the <Start> button to confirm the entered value.
All counters for all user accounts are reset to “0”.
6. Press the <Log In/Out> button.
The machine exits the System Setting Mode.
NOTE: If you have changed any settings in the System Setting Mode, the machine will
automatically reboot to register and enable the new settings. All scanned documents
stored in mailboxes will be deleted on the reboot.