Datasheet

XEROX

D110/ D125 COPIER-PRINTER CED

9.5. Paper Tray Handling and Supported Paper Types

The following table defines standard paper that is recognized by the Integrated Copy and Print Server,

regardless of which feeding tray the media comes from. Specific tray specifications are available on the

product specifications sheet.

Note: Automatic detection is not available for Tray 5; the bypass tray.

Automatically Recognized

Standard Paper sizes

Setting direction Size (mm)

A5 SEF 148.0 x 210.0

B5 LEF 257.0 x 182.0

7.25x10.5 (Executive)* LEF 266.7 x 184.2

A4 SEF 210.0 x 297.0

A4 LEF 297.0 x 210.0

8.0x10 LEF 254.0 x 203.2

8.5x11 SEF 215.9 x 279.4

8.5x11 LEF 279.4 x 215.9

8.5x13 SEF 215.9 x 330.2

8.5x14 SEF 215.9 x 355.6

B4 SEF 257.0 x 364.0

16-kai(TFK)* LEF 267.0 x 194.0

16-kai(GCO)* LEF 270.0 x 195.0

8-kai(TFX)** SEF 267.0 x 388.0

8-kai(GCO)** SEF 270.0 x 390.0

A3 SEF 297.0 x 420.0

11x17 SEF 279.4 x 431.8

12x18 SEF 304.8 x 457.2

12.6x17.7 SEF 320.0 x 450.0

12.6x19.2 SEF 320.0 x 488.0

13x18 SEF 330.2 x 457.2

13x19 SEF 330.2 x 482.6

custom

* 7.25”x10.5”/16-kai (TFK)/16-kai(GCO) to be switched with NVM

** 8-kaiTFX/8-kai (GCO) to be switched with NVM

Note: Custom paper sizes minimums and maximums: 4" x 6"/102mm x 152mm to

13" x 19.2"/330mm x 488mm

Note 2: Paper curl may trigger the stacker-full sensor. Paper curl is depended on paper type/weight, job type,

and/or environment. A customer adjustable curler setting on the interface module may be required to allow

for paper curl.

10. Image Size, Print Area and Registration

The maximum image area this family of Copier/Printer can create is 12 in. x 18.9 in. (305 mm x 480 mm)

The standard area that can be printed leaves a margin of 4.1 mm on all four edges of the paper (for 11” x 17”,

SRA3, 320 mm wide). The actual printing area may vary depending on the printer (plotter) control language.

• ±0.76mm (±1mm) front to back lead registration

• ±0.72mm (±1mm) front to back side registration

• Customer adjustable