Datasheet

XEROX
®
D110/ D125 COPIER-PRINTER CED 25
If a customer decides to install an anti-virus product on FreeFlow
®
PRINT SERVER, they are
responsible for maintaining updates to the product. If system reliability and performance issues are
subsequently reported, Xerox will request the product be removed and the problem replicated, before
attempting to diagnose or troubleshoot the problem.
19.2. Security
The customer is responsible for assessing the security risk for their environment and defining appropriate
mitigation that may include changes to the default settings of the Xerox equipment or standard operating
processes. Xerox understands the importance of maintaining a secure network environment and
recommends that customers change the default “built-in” passwords and modify the security-related
configuration options to satisfy their site-specific security requirements upon completion of system
installation. Xerox is committed to helping the customer keep the print server secure and compliant with the
latest security requirements. This is managed via a Security Audit Process
For more guidance on implementing security see http://www.xerox.com/security
Xerox monitors alerts announcing new Security vulnerabilities. These alerts are evaluated for impacts to the
system and software. All patches applicable to the print server products are prioritized based on severity,
system tested, and integrated into System Problem Action Report (SPAR) releases.
SPAR updates will be installed on your Print Server by Xerox Service. Please contact your support
Analyst or the Xerox Welcome Center for information on the applicability and availability of security
patches. The system cannot be patched or upgraded while operating/printing
19.3. Non-standard Paper Size Support
This system supports non-standard paper sizes. However, due to rounding and unit-conversions that occur
in the client applications, print server, and printer, some mismatch may occur between the paper size
entered at the application, and the paper size that must be entered at the printer. The operator may need
to adjust the entered paper dimensions by up to 0.1 in (2.5 mm) in order for the printer to detect that the
requested paper size has been loaded. In addition, the printer interprets some paper sizes included in the
PPD as non-standard sizes.
19.4. Customer Service and Support
Periodically, Xerox will make available bug fixes and other software releases. Some of these bug fixes and
upgrades are designed to be customer installable. DVDs with patches can be obtained by calling the Xerox
Hotline Support Centre.
19.5. Software Replacement
If lost, or misplaced, replacement software and documentation is available to be purchased. For the United
States you can access through Software Services web site http://www.xdss.com . If you reside outside the
United States, kindly work with your local Xerox
®
Supplies Specialist. Xerox
®
personnel may not be able to
provide services unless these materials are available.
19.6. Print File Creation
There are several factors that effect the creation of a proper output file. These variations can have a
negative impact on processing time. It is always best to create a file with flattened images. Images that are
placed at there appropriate angle, size and screening prior to being implemented in a design program.
Always refer to a design guide for advice. Xerox
®
offers two literatures as guidelines to help you and your
customers. They are The Art & Science of Digital Printing, The Parsons Guide to Getting it Right, and
The Xerox
®
Job Preparation Guide for Designers. These items are part of the Xerox
®
Profit Accelerator
Program.