Datasheet

16 XEROX
®
D110/ D125 COPIER-PRINTER CED
9.3. Specialty Paper
The manufacturer, storage and quality of specialty paper will affect performance. For example, although this
class of copier/printer can run preprinted offset media for overprint applications, the amount of coverage of
the preprinted information will affect the reliability for the media to run though the paper path. Long runs
with substandard input may result in increased jams and other unexpected results.
For further information and recommendations regarding media selection and handling, refer customers to
their Xerox
®
Supplies Specialist.
• Typically, heavy weight papers exhibit increased variability of formation and surface smoothness,
which may result in degraded image quality.
• Preprinted “shells” from offset printers negatively impacts reliability and image quality based on
coverage and other factors.
• Manufacturers of coated stock do not recommend use of their media when the ambient relative
humidity exceeds 60%.
• All paper stretches to a certain extent during printing. The amount of stretch is dependent on
paper type and environmental conditions. Stretch is most noticeable on coated stocks. This stretch
can affect front-to-back image registration.
• Image registration, image quality, and machine reliability can be adversely affected when custom-
cut paper is inaccurately cut, is of poor quality, or loose paper fibers are present on the cut edges.
• Image registration, image quality, jam frequency and machine reliability can be adversely affected
when punched or drilled paper is of poor quality and/or loose hole plugs are present in the ream.
9.4. Carbonless Stock
This copier/printer may run Xerox
®
brand collated carbonless stock, not to be confused with NCR-brand
carbonless or non-collated carbonless which is not recommended because of reduced print quality results
and negative impact to print reliability.
Note: When using NCR-brand carbonless or non-collated carbonless stock:
• reliability may decrease
• special technical representative cleaning procedures are required (not covered by FSMA and are
thus, billable.)
Although this copier/printer is approved to run Xerox
®
brand collated carbonless stock applications, it is not
recommended to do so extensively or exclusively.
For best results, please run Xerox
®
brand collated carbonless stock, fed from the optional Oversized High
Capacity Feeder (OHCF). Please note that intermixing print jobs on regular Bond paper may also increase
the reliability of printing on Xerox
®
Carbonless media.