Datasheet

6 XEROX
®
D110/ D125 COPIER-PRINTER CED
Dies Available
US LTR
497N00216 19-hole CombBind (Standard)
008R13066 19-hole CombBind
008R13072 3-hole
008R13067 44-hole Color Coil
008R13069 32-hole WireBind
008R13070 11-hole VeloBind
008R13071 32-hole ProClick
008R13068 21-hole WireBind
International A4
498K19440 21-hole CombBind (Standard)
498K19340 20-hole Plastic CombBind
498K19370 34-hole Twin Loop (round hole)
498K19360 23-hole Twin Loop (round hole)
498K19390 34-hole Twin Loop
498K19380 23-hole Twin Loop
498K19430 4-hole Loose-leaf
498K19420 2-hole Loose-leaf
498K19400 12-hole Velo
498K19350 47-hole Colour Coil
498K19410 34-hole Pro Click
Note 1: Please check with your Sales Representative for current availability and lead time.
Note 2: Each die set has been treated with oil for protection. This new die set may cause an oil residue at
the punch holes on the first 20 pages of output and each time you lubricate the die sets.
Note 3: It is recommended that the felt pad of the die set be oiled with light machine oil every 50,000
punches. Failure to do so may void the die set warranty.
• The GBC
®
AdvancedPunch™ only punches. Binding will be done offline. Binding options are available
from www.xerox.com (these include binding machines and the combs / coils to bind). Supplies for
binding are available in different colors and diameters.
• The GBC
®
AdvancedPunch™ is positioned in the system after the Interface Module (IFM) and before
other finishing devices.
• Paper sizes up to the limits of printer can pass through the GBC
®
AdvancedPunch™ bypass mode. Only
A4 or Letter-sized paper may be punched.
• Stacking may be mis-aligned for jobs that contain tab stock. These jobs will require additional jogging
before final finishing.
• Reduced stack quality may be experienced when stacking GBC output due to the variability of punch
hole formation(s). Tab stock stack quality will be reduced due to tabs transported at trail edge and
resting unevenly in Top and Stack Trays.
• GBC
®
AdvancedPunch does not work in conjunction with Z-fold, bi-fold, letter fold, multi-function
finisher punch, staple, or booklet making. Due to their physical positions in the system, stock from the
Post Process Inserter Tray cannot be run through the GBC. Also, stacking to booklet output tray or
letter fold output tray is not permitted.
• This Optional GBC
®
AdvancedPunch™ contains a large waste container which holds the scrap punches.
Up to three (3) additional Die Sets may be stored within the GBC
®
AdvancedPunch™.
• Please know that various Tab stocks have been tested and/or are available for order from xerox.com.
• When sending output to the stack tray of the HCS, if this stack height difference exceeds one
inch, the machine will shut down and alert the operator to unload the stacker tray. This is done