User guide

System Setup 1-55
1
DISCARD SIZE - When receiving or copying a document as long as or
longer than the paper installed in your fax machine, you can set the fax
machine to discard any excess image at the bottom of the page, to fit
into the recording paper size.
If the received page is outside the margin you set, it will be printed on
two sheets of paper at the actual size.
If the data is within the margin, and the Auto Reduction feature is
turned ON, it will be reduced to fit into the appropriate size paper
(Discard does not take place). If the Auto Reduction feature is turned
OFF or fails, the data within the margin will be discarded.
Using the number keypad, enter the desired discard size (0-30 mm), and
press the Enter button to store your selection.
REDIAL INTERVAL - Your machine can automatically redial a remote
fax machine if it was busy or does not answer the first call.
Enter the number of minutes (from 1 to 15) using the number keypad.
REDIALS - Enter the number of redial attempts (from 0 to 9) you wish
your machine to make.
Note:
If you enter 0, the machine will not redial.
ANSWER ON RINGS - You can select the number of times your
machine rings before answering an incoming call. If you are using your
machine as both a telephone and a fax machine, it is recommended that
you set the ring count to at least 4 to allow you time to answer a call.
Enter the ring count by selecting a number from 1 through 7 on the
number keypad.
Print the 480cx User Guide