User guide
Table Of Contents
- Table of contents
- Introduction
- System overview of the 4635 LPS
- Using the PC UI
- Paper facts
- System control tasks
- Job control tasks
- Online printing tasks
- Offline printing tasks
- UNKNOWN
- Power on the open-reel tape drive
- Load an open-reel tape
- Load an open-reel tape by hand
- Unload an open-reel tape
- Unload an open-reel tape during a power failure
- Handle open-reel tapes
- Power on the 18 track 1/2 inch cartridge tape drive
- Unload a 1/2 inch cartridge
- Power off the 18/36 track 1/2 inch tape drive
- Handle cartridge tapes
- Load a 1/4 inch cartridge tape
- Handle 1/4 inch cartridge tapes
- Load a floppy disk
- Handle floppy disks
- Start an offline print job
- Rewind/unload tape
- Space
- Move
- UNKNOWN
- HIP printing tasks
- Status and print tasks
- File control tasks
- Maintenance tasks
- Precautions you should take
- Cleaning supplies
- Maintaining the printer
- Replacing the dry ink cartridge
- Replacing the dry ink waste container
- Adding fuser agent
- Cleaning the sensors and the reflecting surfaces
- Tape drive cleaning schedule
- Cleaning precautions—READ BEFORE CLEANING
- Cleaning procedures
- When to clean the tape drive
- Cleaning procedures
- How to clean the floppy disk drive
- Installing the custom transfer assist blade
- Setting tray size with the custom transfer assist blades
- Problem solving tasks
- LPS problems
- Printing problems
- Paper jams
- Incorrect paper size message
- Stacker bin problems
- System controller problems
- Tape drive does not perform self-load routine
- “OK” appears on the tape drive message display, but the loading door is closed
- Basic recovery procedure
- Initial program load (IPL) procedure fails
- You cannot insert a cartridge
- Tape does not unload
- Unloading a cartridge after a power failure
- Tape winds completely out of cartridge
- Message display is blank
- Tape drive does not become ready
- LPS problems
- MICR operating procedures
- Bar code operating procedures
- A. Meter reading and reporting
- B. Supplies
- Glossary
- Index
Related publications
The Xerox 4635 Laser Printing System Operator Guide is part of
the ten-manual reference set for your laser printing system. The
entire reference set is listed in the table below. Several other
related documents are also listed for your convenience. For a
complete list and description of available Xerox documentation,
refer to the Xerox Documentation Catalog (Publication number
610P17417) or call the Xerox Documentation and Software
Services (XDSS) at 1-800-445-5554.
Publication Number
Xerox Dynamic Document Interface
Operator Guide
720P13670
Xerox Dynamic Document Interface
Command Summary
720P13680
Xerox 4635 Laser Printing System
Operator Guide
721P83011
Xerox 4635 Laser Printing System
Operations Reference
721P83021
Xerox 4635 Laser Printing System
Sysgen Guide
721P83030
Xerox 4635 Laser Printing System
Message Guide
721P83040
Xerox 4635 Laser Printing System
PDL/DJDE Reference
721P83050
Xerox 4635 Laser Printing System
Forms Creation Guide
721P83060
Xerox 4635 Laser Printing System
Product Reference
721P83071
Xerox 4635 Laser Printing System
Installation Planning Guide
721P83081
Xerox 4635 Laser Printing System
Operator Command Summary Card
721P83090
Xerox 4635 Laser Printing System
PC UI Reference
721P83101
Xerox Laser Printing Systems
Tape Formats Manual
600P86175
Xerox Laser Printing Systems
Standard Font Library Font User Guide
600P86174
Helpful Facts About Paper 721P82490
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE v