User guide
Table Of Contents
- Table of contents
- Introduction
- System overview of the 4635 LPS
- Using the PC UI
- Paper facts
- System control tasks
- Job control tasks
- Online printing tasks
- Offline printing tasks
- UNKNOWN
- Power on the open-reel tape drive
- Load an open-reel tape
- Load an open-reel tape by hand
- Unload an open-reel tape
- Unload an open-reel tape during a power failure
- Handle open-reel tapes
- Power on the 18 track 1/2 inch cartridge tape drive
- Unload a 1/2 inch cartridge
- Power off the 18/36 track 1/2 inch tape drive
- Handle cartridge tapes
- Load a 1/4 inch cartridge tape
- Handle 1/4 inch cartridge tapes
- Load a floppy disk
- Handle floppy disks
- Start an offline print job
- Rewind/unload tape
- Space
- Move
- UNKNOWN
- HIP printing tasks
- Status and print tasks
- File control tasks
- Maintenance tasks
- Precautions you should take
- Cleaning supplies
- Maintaining the printer
- Replacing the dry ink cartridge
- Replacing the dry ink waste container
- Adding fuser agent
- Cleaning the sensors and the reflecting surfaces
- Tape drive cleaning schedule
- Cleaning precautions—READ BEFORE CLEANING
- Cleaning procedures
- When to clean the tape drive
- Cleaning procedures
- How to clean the floppy disk drive
- Installing the custom transfer assist blade
- Setting tray size with the custom transfer assist blades
- Problem solving tasks
- LPS problems
- Printing problems
- Paper jams
- Incorrect paper size message
- Stacker bin problems
- System controller problems
- Tape drive does not perform self-load routine
- “OK” appears on the tape drive message display, but the loading door is closed
- Basic recovery procedure
- Initial program load (IPL) procedure fails
- You cannot insert a cartridge
- Tape does not unload
- Unloading a cartridge after a power failure
- Tape winds completely out of cartridge
- Message display is blank
- Tape drive does not become ready
- LPS problems
- MICR operating procedures
- Bar code operating procedures
- A. Meter reading and reporting
- B. Supplies
- Glossary
- Index
GLOSSARY
GLOSSARY-6 XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
host Computer accessed by users which serves as a source of high-
speed data processing for workstations with less computer
power.
icon Symbol appearing on the PC UI or printer control console that
can be opened to display a window or screen options.
IFU Interpress font utility. Program used to convert FIS fonts to LPS
fonts.
image area Area on a physical page that may contain text or graphics.
image smear An image defect caused by multiple passes in the reader sorters,
characterized by image material (toner) deposited in the
background area adjacent to the character and the clear bad area.
interface Device by which two systems connect and communicate with
each other.
interpolation Series of logical rules implemented in the printer to convert a
300 spi input video stream to a 600 spi output video stream.
Interpolation is functionally analogous to bit doubling (2x
scaling), except the logical rules result in superior output.
Interpress Xerox standard that defines digital representation of lines for
printing. Interpress documents can be printed on any sufficiently
powerful printer equipped with Interpress print software.
IPL initial program load. For the optional open-reel tape drive, the
internal initialization sequence whereby certain functions are
loaded into random access memory (RAM).
JDE job descriptor entry.
JDE job descriptor entry. Collection of job descriptions. See also
job; JSL.
JDL job descriptor library. Collection of compiled job descriptions.
See also JSL.
job concatenation mode In HIP, a mode in which multiple print jobs are processed as
reports in one print job. See also concatenate.
JSL job source library. Collection of uncompiled job descriptions.
See also job; JDE; and JDL.
keyword Required part of a command. See also operator command.