User guide
Table Of Contents
- Table of contents
- Introduction
- System overview of the 4635 LPS
- Using the PC UI
- Paper facts
- System control tasks
- Job control tasks
- Online printing tasks
- Offline printing tasks
- UNKNOWN
- Power on the open-reel tape drive
- Load an open-reel tape
- Load an open-reel tape by hand
- Unload an open-reel tape
- Unload an open-reel tape during a power failure
- Handle open-reel tapes
- Power on the 18 track 1/2 inch cartridge tape drive
- Unload a 1/2 inch cartridge
- Power off the 18/36 track 1/2 inch tape drive
- Handle cartridge tapes
- Load a 1/4 inch cartridge tape
- Handle 1/4 inch cartridge tapes
- Load a floppy disk
- Handle floppy disks
- Start an offline print job
- Rewind/unload tape
- Space
- Move
- UNKNOWN
- HIP printing tasks
- Status and print tasks
- File control tasks
- Maintenance tasks
- Precautions you should take
- Cleaning supplies
- Maintaining the printer
- Replacing the dry ink cartridge
- Replacing the dry ink waste container
- Adding fuser agent
- Cleaning the sensors and the reflecting surfaces
- Tape drive cleaning schedule
- Cleaning precautions—READ BEFORE CLEANING
- Cleaning procedures
- When to clean the tape drive
- Cleaning procedures
- How to clean the floppy disk drive
- Installing the custom transfer assist blade
- Setting tray size with the custom transfer assist blades
- Problem solving tasks
- LPS problems
- Printing problems
- Paper jams
- Incorrect paper size message
- Stacker bin problems
- System controller problems
- Tape drive does not perform self-load routine
- “OK” appears on the tape drive message display, but the loading door is closed
- Basic recovery procedure
- Initial program load (IPL) procedure fails
- You cannot insert a cartridge
- Tape does not unload
- Unloading a cartridge after a power failure
- Tape winds completely out of cartridge
- Message display is blank
- Tape drive does not become ready
- LPS problems
- MICR operating procedures
- Bar code operating procedures
- A. Meter reading and reporting
- B. Supplies
- Glossary
- Index
SUPPLIES
Table B-1. Consumable supplies (continued)
8.5 x 11 inch Dual Purpose Colors—Rainbow Pack
(35,000 sheets/carton—250 sheets/pack) 3R3107
8.5 x 11 inch 10 Series Dual Purpose Paper 3R2950
8.5 x 11 inch 10 Series Dual Purpose Paper, 3-hole 3R2952
8.5 x 11 inch 10 Series Dual Purpose Paper, 3-hole* 3R3016
8.5 x 14 inch 10 Series Dual Purpose Paper 3R2954
8.5 x 11 inch 10 Series Smooth 3R54
8.5 x 14 inch 10 Series Smooth 3R83
8.5 x 11 inch 4024 Dual Purpose, reinforced 3-hole 3R2057
9 x 11 inch 65 lb., divider white 3R3428
11 x 17 inch 4024 Dual Purpose Paper 3R729
Transparencies Xerox transparencies are packaged 100
to a box.
8.5 x 11 inch Clear, with a white strip on the edge 3R2780
High Speed All labels are on 8.5 x 11 inch sheets,
Labels (gummed) 1000 sheets to a box.
8.5 x 11 inch 33 labels per sheet 3R3139
8.5 x 11 inch 24 labels per sheet 3R4474
8.5 x 11 inch 8 labels per sheet 3R4475
8.5 x 11 inch 6 labels per sheet 3R3146
8.5 x 11 inch 1 label per sheet 3R4476
8.5 x 11 inch Custom form
To order call:
800-822-2200 or
716-423-3861
Tab stock 250 sheets per carton
Straight Collated
Singles (5-tab set) Non-drilled, 90 lb., Index white 3R4417
3 hole drilled, 90 lb., Index white 3R4418
Non-drilled, 90 lb., Index white 3R4425
3 hole drilled, 90 lb., Index white 3R4426
Reverse Collated
Singles (5-tab set) Non-drilled, 90 lb., Index white 3R4415
3 hole drilled, 90 lb., Index white 3R4416
Cover stock
8.5 x 11 inch 65 lb., blue 3R3044
8.5 x 11 inch 65 lb., white 3R3041
Item Description Part number
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE B-3