User guide
Table Of Contents
- Table of contents
- Introduction
- System overview of the 4635 LPS
- Using the PC UI
- Paper facts
- System control tasks
- Job control tasks
- Online printing tasks
- Offline printing tasks
- UNKNOWN
- Power on the open-reel tape drive
- Load an open-reel tape
- Load an open-reel tape by hand
- Unload an open-reel tape
- Unload an open-reel tape during a power failure
- Handle open-reel tapes
- Power on the 18 track 1/2 inch cartridge tape drive
- Unload a 1/2 inch cartridge
- Power off the 18/36 track 1/2 inch tape drive
- Handle cartridge tapes
- Load a 1/4 inch cartridge tape
- Handle 1/4 inch cartridge tapes
- Load a floppy disk
- Handle floppy disks
- Start an offline print job
- Rewind/unload tape
- Space
- Move
- UNKNOWN
- HIP printing tasks
- Status and print tasks
- File control tasks
- Maintenance tasks
- Precautions you should take
- Cleaning supplies
- Maintaining the printer
- Replacing the dry ink cartridge
- Replacing the dry ink waste container
- Adding fuser agent
- Cleaning the sensors and the reflecting surfaces
- Tape drive cleaning schedule
- Cleaning precautions—READ BEFORE CLEANING
- Cleaning procedures
- When to clean the tape drive
- Cleaning procedures
- How to clean the floppy disk drive
- Installing the custom transfer assist blade
- Setting tray size with the custom transfer assist blades
- Problem solving tasks
- LPS problems
- Printing problems
- Paper jams
- Incorrect paper size message
- Stacker bin problems
- System controller problems
- Tape drive does not perform self-load routine
- “OK” appears on the tape drive message display, but the loading door is closed
- Basic recovery procedure
- Initial program load (IPL) procedure fails
- You cannot insert a cartridge
- Tape does not unload
- Unloading a cartridge after a power failure
- Tape winds completely out of cartridge
- Message display is blank
- Tape drive does not become ready
- LPS problems
- MICR operating procedures
- Bar code operating procedures
- A. Meter reading and reporting
- B. Supplies
- Glossary
- Index
TABLE OF CONTENTS
Unload a 1/4 inch cartridge tape 7-22
Handle 1/4 inch cartridge tapes 7-23
Floppy disk drive procedures 7-23
Load a floppy disk 7-24
Unload a floppy disk 7-24
Handle floppy disks 7-25
Offline printing tasks through windows of PC UI 7-26
Offline printing tasks through command line 7-27
Offline printing tasks 7-27
Start an offline print job 7-27
Rewind/unload tape 7-29
Space 7-30
Move 7-31
8. HIP printing tasks 8-1
HIP printing tasks through windows of PC UI 8-2
HIP printing tasks through command line 8-3
HIP printing tasks 8-3
Enter HIP communication mode 8-3
Select a communication mode 8-5
Place HIP online 8-5
Take HIP offline 8-6
Start a HIP print job 8-6
Stop HIP print jobs 8-8
Abort a HIP print job 8-8
HIP jobs status 8-10
End HIP 8-15
9. Status and print tasks 9-1
Status and print tasks through windows of PC UI 9-3
Status and print tasks through command line 9-3
Understanding clusters 9-3
Status and print tasks 9-4
Printer status 9-4
Select feeder trays 9-8
Select stacker bins 9-10
Tray loading 9-12
Clusters 9-13
Ordered stock 9-17
Transparencies 9-18
Select units 9-19
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE xi