User guide
Table Of Contents
- Table of contents
- Introduction
- System overview of the 4635 LPS
- Using the PC UI
- Paper facts
- System control tasks
- Job control tasks
- Online printing tasks
- Offline printing tasks
- UNKNOWN
- Power on the open-reel tape drive
- Load an open-reel tape
- Load an open-reel tape by hand
- Unload an open-reel tape
- Unload an open-reel tape during a power failure
- Handle open-reel tapes
- Power on the 18 track 1/2 inch cartridge tape drive
- Unload a 1/2 inch cartridge
- Power off the 18/36 track 1/2 inch tape drive
- Handle cartridge tapes
- Load a 1/4 inch cartridge tape
- Handle 1/4 inch cartridge tapes
- Load a floppy disk
- Handle floppy disks
- Start an offline print job
- Rewind/unload tape
- Space
- Move
- UNKNOWN
- HIP printing tasks
- Status and print tasks
- File control tasks
- Maintenance tasks
- Precautions you should take
- Cleaning supplies
- Maintaining the printer
- Replacing the dry ink cartridge
- Replacing the dry ink waste container
- Adding fuser agent
- Cleaning the sensors and the reflecting surfaces
- Tape drive cleaning schedule
- Cleaning precautions—READ BEFORE CLEANING
- Cleaning procedures
- When to clean the tape drive
- Cleaning procedures
- How to clean the floppy disk drive
- Installing the custom transfer assist blade
- Setting tray size with the custom transfer assist blades
- Problem solving tasks
- LPS problems
- Printing problems
- Paper jams
- Incorrect paper size message
- Stacker bin problems
- System controller problems
- Tape drive does not perform self-load routine
- “OK” appears on the tape drive message display, but the loading door is closed
- Basic recovery procedure
- Initial program load (IPL) procedure fails
- You cannot insert a cartridge
- Tape does not unload
- Unloading a cartridge after a power failure
- Tape winds completely out of cartridge
- Message display is blank
- Tape drive does not become ready
- LPS problems
- MICR operating procedures
- Bar code operating procedures
- A. Meter reading and reporting
- B. Supplies
- Glossary
- Index
TABLE OF CONTENTS
Abort 5-3
Reset 5-4
Align 5-5
Print Darkness 5-8
Lead edge screen 5-9
MICR control 5-11
Bar code reader control 5-11
Fonts/forms/graphics 5-11
Sample files 5-13
Stop input/output 5-16
Continue input/output 5-17
Sample 5-18
6. Online printing tasks 6-1
Online printing tasks through windows of PC UI 6-2
Online printing tasks through command line 6-3
Place the LPS online to the host computer 6-3
Online printing tasks 6-3
Start an online print job 6-3
Space 6-5
Endjob 6-6
Drain 6-6
Disk saturation 6-7
7. Offline printing tasks 7-1
Open-reel tape drive procedures 7-2
Power on the open-reel tape drive 7-2
Load an open-reel tape 7-3
Load an open-reel tape by hand 7-4
Unload an open-reel tape 7-8
Unload an open-reel tape during a power failure 7-9
Power off the open-reel tape drive 7-12
Handle open-reel tapes 7-13
1/2 inch cartridge tape drive procedures 7-14
Power on the 1/2 inch cartridge tape drive 7-14
Load a 1/2 inch cartridge tape 7-15
Unload a 1/2 inch cartridge tape 7-17
Power off the 1/2 inch cartridge tape drive 7-18
Handle cartridge tapes 7-19
1/4 inch cartridge tape drive procedures 7-21
Load a 1/4 inch cartridge tape 7-22
x XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE