Manual

Xerox 4595 Copier/Printer System Administration Guide
8-91
8. Setups
Edge Erase - Bottom Edge Select the default setting for the amount of edge that is erased
from the original in the bottom direction. Select from 0-50 mm in 1
mm increments.
Edge Erase - Left Edge Select the default setting for the amount of edge that is erased
from the original in the left direction. Select from 0-50 mm in 1
mm increments.
Edge Erase- Right Edge Select the default setting for the amount of edge that is erased
from the original in the right direction. Select from 0-50 mm in 1
mm increments.
Center Erase Select the default setting for the amount that is erased from the
center of the original. Select from 0-50 mm in 1 mm increments.
Image Shift - Side 1 Select the default setting for Side 1 output. Select from the
following options: No Shift, Auto Center, Corner Shift - Top
Right, Corner Shift - Bottom Right, Corner Shift - Top Left,
Corner Shift - Bottom Left, Corner Shift - Top Center, Corner
Shift - Bottom Center, Corner Shift - Left Center, and Corner
Shift - Right Center.
Image Shift - Side 2 Select the default setting for Side 2 output. Select from the
following options: No Shift, Auto Center, Corner Shift - Top
Right, Corner Shift - Bottom Right, Corner Shift - Top Left,
Corner Shift - Bottom Left, Corner Shift - Top Center, Corner
Shift - Bottom Center, Corner Shift - Left Center, Corner Shift -
Right Center, and Mirror Shift.
Image Rotation Select the default setting for Image Rotation. Select from
Always On, On during Auto, or Off.
Image Rotation - Rotation
Direction
Select the default setting for Image Rotation Direction.This
setting scans your originals in order to find mixed image
orientation and determines whether or not to rotate the
images. Select from Staple Position, Portrait Original - Left
Edge, and Portrait Original - Right Edge.
Original Orientation Select the default setting from either Head to Top or Head to Left.