Operation Manual

Xerox 4110/4590 User Guide
3-11
3. Copy
Changing the copy quantity
To change the number of documents that are being scanned or
copied, follow the below procedure:
1. Select Stop on the UI touch screen or press the Stop button
on the control panel.
2. Select Change Quantity on the touch screen.
3. Specify the quantity using the numeric keypad.
4. Press the Start button on the control panel.
NOTE: The quantity entered must be greater than the
quantity already copied. If you enter a quantity that is the
same number as that which has been copied, no additional
copies will be made.
Stop button