Operation Manual

Xerox 4110/4590 User Guide
12-71
12. Problem Solving
2. Pull out the tri-fold output tray 2d, swing lever 2g, and remove
the jammed paper.
NOTE: If paper is torn, check for any torn pieces of paper inside
the machine.
3. Return lever 2g to the original position and push back the
tri-fold output tray 2d.
4. Close the Finisher right cover.
NOTE: A message will be displayed and the machine will not
operate if the Staple Finisher's right cover is even slightly
open.
Paper jams at unit 4 and knob 4a
1. Make sure that the machine has stopped and then open the
right cover on the light finisher.