Operation Manual

Xerox 4110/4590 User Guide
12-6
12. Problem Solving
Copies are not
made at the
desired size.
Is the document scanning
glass or the document cover
dirty?
Clean the document feeder glass or the
document cover.
Refer to “Cleaning the Document Cover
and Document Glass” on page 11-15.
Is the document made of
highly transparent material
like a transparency?
Place the document on the document
glass, and place a white sheet on top of the
document before making a copy.
Is the document at the
correct position?
Load the document correctly.
Refer to “Step 1 Loading Documents” on
page 3-2.
Is the document loaded
correctly?
Is the document guides at
the correct position?
Properly set the document guides.
Refer to “Step 1 Loading Documents” on
page 3-2.
Is the document folded or
bent?
Straighten and properly reset the
document.
Refer to “Step 1 Loading Documents” on
page 3-2.
Is the document a
non-standard size?
Enter the document size.
Refer to “Original Size (Specifying the
Scan Size for the Document)” on page 3-
36.
Symptoms Check Remedy