Operation Manual

Xerox 4110/4590 User Guide
2-4
2. Product overview
No. Component Function
27 Tray 8/Post-process inserter
(Cover/Transparency
separator tray)
Load paper for cover or transparency separators. Paper loaded here is not used
for copying.
28 Decurl button Press this button to decurl copied paper.
29 Output tray Copies are delivered here when specific output features are selected, such as
Automatic sorting, Collated, Uncollated, or Normal.
30 Finisher tray Receives copies when you select stapled, punched, and Z-folded copies.
31 Booklet output tray Receives copies when you select Bi-Fold or Bi-Fold + Stapling.
32 Booklet output tray button Press this button to deliver and retrieve booklets from the output area.
33 Right cover Open to clear paper jams, replace staples, clear jammed staples, or replace the
scraps from the puncher.
34 Staple cartridges for booklet There are two staple cartridge for booklet. Remove this cartridge to replace
staples and clear staple jams.
35 Staple cartridge Contains staples; remove this cartridge to replace staples and clear staple
jams.
36 Punch scrap container Collects the scraps from the puncher. Open to remove the scraps.
37 Tri-Fold output tray (optional) Receives copies when you select Tri-Fold In or Tri-Fold out.
38 Tri-Fold output tray button Press this button to open tri-Fold output tray.
39 Left cover. Open this cover to access the machine and to clear paper jams.
40 Staple cartridge storage
space
Staple cartridge for replacement can be stored.
NOTE 1: Throughout this guide, Finisher D and Booklet Finisher D may be referred to simply as the Finisher.
NOTE 2: Throughout this guide, the Duplex Automatic Document Feeder is abbreviated as "Document Feeder.”