Operation Manual

Xerox 4110/4590 User Guide
11-14
11. Maintenance
4. Insert the empty punch scrap container as far as possible.
5. Close the right cover of the light finisher.
NOTE: A message will be displayed and the machine will not
operate if the right cover is even slightly open.
Cleaning the Machine
The following section describes how to clean the machine.
This section is divided into separate descriptions on how to clean
the exterior, internal components, document cover/document
feeder, and document glass.
Cleaning the Exterior
The following procedure describes how to clean the exterior.
KEY POINT: Before you start to clean the machine, be sure to
switch off and unplug the machine. Cleaning the machine without
switching off the power may cause an electric shock.
Do not use benzene, paint thinner, other volatile liquids, or
spray insect repellent on the machine as doing so may
discolor, deform, or crack covers.
Cleaning the machine with an excessive amount of water
may cause the machine to malfunction or damage
documents during copying.
1. Wipe the exterior with a soft cloth moistened with water.