Operation Manual

Xerox 4110/4590 User Guide
8-5
8. Paper and Other Media
Loading Paper in Trays 1 to 2
Following describes the procedure for loading paper in
trays 1 to 2.
When the machine runs out of paper during copying or printing, a
message is displayed on the Control Panel display. Add paper
according to the displayed instructions. Copying or printing is
automatically resumed when paper is added.
1. Pull out the tray towards you until it stops.
2. Load and align the edge of the paper against the left edge of
the tray with the side to be copied or printed on facing up.
KEY POINT: Do not load paper exceeding the maximum fill line.
Doing so might cause paper jams or machine trouble.
3. Push the tray in gently until it comes to a stop.
WARNING:When pulling out the paper tray, do it slowly.
If pulled out with too much force, the tray can hit and
injure your knees.
