Operation Manual

Xerox 4110/4590 User Guide
5-48
5. Mailbox Management
Finishing - Hole Punching Screen
You can select a punching position which is not displayed on the
Finishing - Hole Punching screen.
NOTE: Three positions for punching can be configured according
to an optional feature. In this case, 2 and 4 positions for punching
cannot be selected. Contact your Customer Support Center for
more information.
! Document Specified
Uses the same settings as when the document was saved.
! Off
No punch.
! 2 Holes
You can select from three positions for punching.
! 4 Holes
You can select from three positions for punching.