Operation Manual

Xerox 4110/4590 User Guide
3-61
3. Copy
Poster is not applied to copies.
! Output Size
You can select from seven paper sizes.
! Enlargement%
You can select enlargement by percentage.
Depending on your selection, the following options may appear:
! Paper Tray Settings
Displays the Poster - Paper Tray Settings screen. Select the
paper tray to use.
When Bypass is selected, the Tray 5 (Bypass) screen appears.
For more information, refer to “Tray 5 (Bypass) Screen” on
page 3-21.
When Enlargement% is Selected
You can specify a different ratio for the height and width.
1. From the Poster screen, select Enlargement%.
2. Use and to specify the height and width ratios.
3. Select Save to keep your selection.
! X (width) Y (height)
Set the height and width ratios within the range from 100 to 400%
in 1% increments.