User guide

Automatic Installation Procedure
Chapter 5: Using the Printer with UNIX TCP/IP ❖ 5-9
Initial
Installation
The following procedures allow you to install the Enstall program
and to use it to create a print queue on your host spooling system
the first time:
Note
Do not install the Xerox printer drivers that are supplied with
your printer before finishing the Enstall installation for
network printing.
Note
For complete installation procedures for the SUN
environment, refer to Appendix B, at the back of this
configuration guide.
1
Log on as root at the system prompt.
2
Insert the UNIX Installation Utility diskette into your floppy
drive.
3
Change to the working directory where you wish to install
the files.
4
At the system prompt, enter the command:
tar xvf device_name ./ xrx
where device_name refers to the drive in which the
diskette is inserted, and xrx is the subdirectory into which
the files are to be installed.
For example:
tar xvf /dev/fd0 ./xrx
Or:
tar xvf /dev/rdiskette ./xrx
This installs the files in the xrx subdirectory of the current
working directory.
Etr-ch05 Page 9 Thursday, October 24, 1996 7:31 PM