User guide
Overview
5-6 ❖ XNIC-ENET/TRING Configuration Guide
Setting up Print Queues on the Host System
Print queues can be configured on the host system using one of
the following methods:
Automatic installation: Performed with the user-friendly
Enstall program contained on the UNIX Installation Utility
diskette.
Manual installation: Performed by using one of these two
methods:
The lpd print protocol that is native on BSD hosts
The rprint program supplied on the UNIX Installation
Utility diskette for either BSD or System V hosts.
We recommend that you use the Enstall program both to
automatically set the IP address on the XNIC and to set up print
queues on the host. Refer to Automatic Installation Procedure
(page 5-8).
However, if you prefer to set the IP address on the XNIC and to
set up print queues on the host manually, refer to Manual
Installation Procedure (page 5-12).
Network Considerations
UNIX TCP/IP systems require:
Support for lpd or rprint (Xerox-supplied)
Client support of TCP/IP, TELNET, and UDP.
Note
The XNIC does not support UNIX FTP (File Transfer Protocol).
Etr-ch05 Page 6 Thursday, October 24, 1996 7:31 PM