User guide

Configuring the XNIC as a Remote Printer (NetWare 2.x/3.x)
Chapter 3: Using the Printer with Novell NetWare ❖ 3-31
Assigning and
Restarting the
Print Queue
6
Enter the XNIC printer name as:
XNE xxxxxx _1 (for XNIC-ENET)
or as:
XNT xxxxxx _1 (for XNIC-TRING),
Where xxxxxx is the last six characters of the XNIC hardware
address. Upper and lower case letters arent important. For
example, a valid name would be: XNE 1076E3 _1 or
XNT 88E829 _1
7
Press the <Down-arrow> key to select Type, and press
<Enter> to display the printer types.
Select Remote Other/Unknown from the list.
8
Save your changes by pressing <Esc> and selecting Yes to
confirm the save.
9
Press <Esc> to redisplay the Print Server Configuration
menu.
1
Select Queues Serviced by Printer from the Print Server
Configuration menu.
2
Select the XNIC printer name.
For example: XNE1076E3_1
3
Press <Insert> to display the list of available queues.
Select the queue to be serviced by the Xerox printer.
4
Enter a Priority level number for the printer (default is 1,
highest) and press <Enter>.
5
Press <Esc> until the Available Options menu is displayed.
6
If you wish to service several queues with the Xerox printer,
repeat Steps 3 and 4 for each additional queue.
ETR-CH03 Page 31 Wednesday, October 23, 1996 6:46 PM