User guide

Configuring the XNIC as a Remote Printer (NetWare 2.x/3.x)
3-30 ❖ XNIC-ENET/TRING Configuration Guide
Creating the
Print Queue
Adding the
Remote Printer
1
Login to the Novell file server with supervisor privileges.
At the DOS prompt, enter:
LOGIN fileserver \SUPERVISOR
At the prompt, enter the password .
2
At the DOS prompt, enter:
PCONSOLE
3
Select Print Queue Information from the Available
Options menu.
4
To create a new queue, press <Insert>, which opens a
dialog box.
Enter in a name and press <Enter> and the new queue
name will appear on the list.
5
Press <Esc> until the Available Options menu is
redisplayed.
1
Select Print Server Information from the Available
Options menu.
2
If several Print Servers are displayed, select the one you
want to service the Xerox printer.
For example, an existing Print Server name might be
remote_mode. You may also create a new Print Server and
select it.
3
Select Print Server Configuration from the Print Server
Information menu.
4
Select Printer Configuration.
5
Select one of the Not Installed printers from the list of
printers displayed.
ETR-CH03 Page 30 Wednesday, October 23, 1996 6:46 PM