User guide

Using NWAdmin
3-24 ❖ XNIC-ENET/TRING Configuration Guide
Adding the Printer
4
Enter the Print Server name as:
XNE xxxxxx (for XNIC ENET)
or as:
XNT xxxxxx (for XNIC TRING)
where xxxxxx is the last six characters of the XNIC hardware
address.
5
Click the Create button.
1
Use the right mouse button to click the context to which the
XNIC Print Server will be added.
2
Select Create from the displayed menu.
3
Select the Printer object and click OK.
4
Enter the Printer name as:
XNE xxxxxx _1 (for XNIC ENET)
or as:
XNT xxxxxx _1 (for XNIC TRING)
The printer name is the print server name followed by an
underscore _ and a 1. Upper and lower case letters arent
important. For example, a valid name would be:
XNE 1076E3 _1 or XNT 88E829 _1
If the printer name has been changed using the DS/P
Utility, print the Printer Configuration Sheet to verify
the printers name.
5
Click the Create button.
ETR-CH03 Page 24 Wednesday, October 23, 1996 6:46 PM