User guide

Using the Printer with Novell NetWare
3-18 ❖ XNIC-ENET/TRING Configuration Guide
Adding the Printer
Selecting the
Print Queue
1
Select Printers from the Available Options menu and press
<Enter>.
An error message may pop up indicating a mode
mismatch. Ignore this message and continue with the
next step.
2
Press <Insert>.
3
Enter the Printer name as:
XNE xxxxxx _1 (for XNIC ENET)
or as:
XNT xxxxxx _1 (for XNIC TRING)
The printer name is the print server name followed by an
underscore _ and a 1. Upper and lower case letters arent
important. For example, a valid name would be:
XNE 1076E3 _1 or XNT 88E829 _1
If the printer name has been changed using the DS/P
utility, print the Printer Configuration Sheet to verify
the printers name.
1
Select Printers from the Available Options menu and press
<Enter>.
2
Select your newly defined printer and press <Enter>.
3
Select Printer Type from the Printer Configuration menu
and press <Enter>.
4
Select Other/Unknown from the list and press <Enter>.
5
Select Print Queues Assigned, then press <Enter>.
6
Press <Insert>.
This will display a list of available print queues.
ETR-CH03 Page 18 Wednesday, October 23, 1996 6:46 PM