User guide

Using PConsole
Chapter 3: Using the Printer with Novell NetWare ❖ 3-17
Adding the Print
Server
4
Select Change Context from the Available Options menu.
5
Enter the desired context name or press <Insert> to
browse for available contexts.
The context name defines the location of the print
queue in the NDS tree.
6
Select Print Queues from the Available Options menu.
7
Press <Insert> to create a new print queue.
8
Enter the Queue name.
9
Enter the volume where the queue will be located.
If you are unsure, press <Insert> to display a list of the
available volumes.
10
Highlight the desired volume name and press <Enter>.
11
Press <Esc> until the Available Options menu is
redisplayed.
1
Select Print Servers from the Available Options menu and
press <Enter>.
2
Press <Insert>.
3
Enter the Print Server name as:
XNE xxxxxx (for XNIC ENET)
or as:
XNT xxxxxx (for XNIC TRING)
where xxxxxx is the last six characters of the XNIC hardware
address.
ETR-CH03 Page 17 Wednesday, October 23, 1996 6:46 PM