User guide

Configuring the XNIC as a Print Server (NetWare 2.x/3.x)
Chapter 3: Using the Printer with Novell NetWare ❖ 3-11
Assigning the
Print Queue
1
Select Print Server Information from the Available
Options menu.
2
Select the print server from the list.
3
Select Print Server Configuration from the menu.
4
Select Queues Serviced by Printer from the Print Server
Configuration menu.
5
Select the Xerox printer name.
For example, XNE1076E3_1.
6
Press <Insert> to display the list of available queues.
Select the queue to be serviced by the Xerox printer.
7
Enter a Priority level number for the printer (default is 1,
highest) and press <Enter>.
8
If you wish to service several queues with the Xerox printer,
repeat Steps 6 and 7 for each additional queue.
9
Press <Esc> seve ral ti m es until the Available Options
menu is displayed.
Note
If your network has more than 25 file servers, before
continuing to the next section Restarting the XNIC, it is
recommended to configure the XNIC. Refer to 4. Setting
Required / Preferred File Server Name (Recommended for
Large Networks) (page 3-45).
Setting the file server name on the XNIC will automatically
reset the XNIC. Therefore, you can skip the next section
Restarting the XNIC and proceed on.
ETR-CH03 Page 11 Wednesday, October 23, 1996 6:46 PM