User guide

Configuring the XNIC as a Print Server (NetWare 2.x/3.x)
3-10 ❖ XNIC-ENET/TRING Configuration Guide
Creating the
Print Queue
10
Enter the XNIC printer name as:
XNE xxxxxx _1 (for XNIC-ENET)
or as:
XNT xxxxxx _1 (for XNIC-TRING),
The printer name is the print server name followed by an
underscore _ and a 1. Upper and lower case letters arent
important. For example, a valid name would be:
XNE 1076E3 _1 or XNT 88E829 _1
If the printer name has been changed using the DS/P
utility, then print the Printer Configuration Sheet to
verify the printers name.
11
Press the <Down-arrow> key to select Type, and press
<Enter> to display the printer types.
12
Select the printer type Defined Elsewhere.
13
Save your changes by pressing <Esc> and selecting Yes to
confirm the save.
14
Press <Esc> several times until the Available Options
menu is redisplayed.
1
Select Print Queue Information from the Available
Options menu.
To select an item from a menu in PCONSOLE, use the arrow
keys to highlight the item, then press <Enter>.
2
Create a new Print Queue:
 Press <Insert> and a dialog box opens.
 Enter a name for the print queue.
 Press <Esc> until you redisplay the Available Options
menu.
ETR-CH03 Page 10 Wednesday, October 23, 1996 6:46 PM