User guide

Configuring the XNIC as a Print Server (NetWare 2.x/3.x)
Chapter 3: Using the Printer with Novell NetWare ❖ 3-9
Adding the
Print Server
and Printer
These procedures use the commands for Novell NetWare 2.x
or 3.x. Unless noted, commands can be upper or lower case.
Typed commands should be entered by pressing the
<Enter> key.
1
Log in to the Novell file server so that you have supervisor
privileges. At the prompt, enter:
LOGIN fileserver \SUPERVISOR
At the prompt, enter the password.
2
At the system prompt, enter:
PCONSOLE
3
Select Print Server Information from the Available
Options menu.
To select an item from a menu in PCONSOLE, use the arrow
keys to highlight the item, then press <Enter>.
4
Press <Insert>.
5
Enter the print server name as:
XNE xxxxxx (for XNIC-ENET)
or as:
XNT xxxxxx (for XNIC-TRING),
where xxxxxx is the last six characters of the XNIC hardware
address.
6
Select the print server name you just defined.
7
Select Print Server Configuration from the menu.
8
Select Printer Configuration from the menu.
9
Select one of the Not Installed printers from the list of
printers displayed.
ETR-CH03 Page 9 Wednesday, October 23, 1996 6:46 PM