User guide

Initial Installation
B-8 ❖ XNIC-ENET/TRING Configuration Guide
From a Remote CD-ROM Device
Refer to Installing Files from a Remote CD-ROM Device
(page B-26) for the instructions to retrieve and install files from
the remote CD-ROM device.
Parallel Port
Printing
On SunOS Systems
Installation instructions for this section are currently not
available. You may need to ask your system administrator to
assist you on setting up the /etc/printcap file correctly to work
with your printers parallel port.
On Solaris Systems
1
Bring up Openwin. Enter:
# /usr/openwin/bin/openwin
2
Click the right mouse button and select Command Tool.
3
In Command Tool, bring up the Admintool. Enter:
# admintool &
4
When the Admintool window comes up, click Printer
Manager.
5
When the Printer Manager window comes up, click Edit and
select Add Printer, then select Add Local Printer.
6
When the Add Local Printer window comes up, select the
Printer Port.
It will display a list of devices. The parallel port device will
most likely be /dev/term/bpp0.
7
While you are still in the Add Local Printer window, give the
name of your printer and set file contents. Click OK when
you are done.
ETR-APPB Page 8 Thursday, October 24, 1996 7:51 AM