User guide

B-4 ❖ XNIC-ENET/TRING Configuration Guide

Initial

Installation

Choose Network Printing (below), Parallel Port Printing

(page B-8), or both.

Network

Printing

From a Local Floppy Device

Decide where you want to store the Xerox Installation Files

on the hard disk of your workstation and create a directory.

Change to the directory you just created.

Insert the UNIX Installation Utility diskette that is shipped

with the XNIC into the floppy drive and enter the following

at the command line to begin the installation:

# /etc/init.d/volmgt stop (only on Solaris Systems)

# tar xvf /dev/fd0 ./xrx (this will extract the

installation files)

# cd ./xrx

# ./enstall -s (this will start the

installation program)

When the program asks you to enter the number

corresponding to your system, enter the number that relates

to the selection for SunOS or Solaris.

When asked to enter the device full path and file

specification of your distribution medium, enter the name of

your floppy device.

For example:

# /dev/fd0, /dev/rdiskette (or whatever it may be)

When asked to which LAN Interface the Xerox servers will

be connected, enter either your Ethernet or Token Ring

device name.

For example:

le0, tr0, hme0 (or whatever is on your

system)

ETR-APPB Page 4 Thursday, October 24, 1996 7:51 AM