User guide

Next Steps
2-10 ❖ XNIC-ENETT/TRING Configuration Guide
Next Steps
You are now ready to configure your printer for your network.
This table will help you decide what chapter(s) to read to do
this
.
If your network is Then go to
Novell NetWare Chapter 3: Using the
Printer with Novell
NetWare
AppleTalk Chapter 4: Using the
Printer with EtherTalk or
TokenTalk
UNIX TCP/IP Chapter 5: Using the
Printer with UNIX TCP/IP
DEC LAT
(XNIC-ENET only)
Chapter 6: Using the
Printer with LAT
LAN Manager via TCP/IP
or NetBIOS/NetBEUI
Chapter 7: Using the
Printer with LAN Manager
LAN Server via TCP/IP or
NetBIOS/NetBEUI
Chapter 8: Using the
Printer with LAN Server
Windows NT via TCP/IP or
NetBIOS/NetBEUI
Chapter 9: Using the
Printer with Windows NT
SNMP Chapter 10: Using the
Printer with SNMP
Etr-ch02 Page 10 Thursday, October 24, 1996 4:49 PM