User guide

Windows NT Problems
Chapter 11: Troubleshooting ❖ 11-27
A General Protection
error occurs in
CorelDraw! when
printing (continued).
CorelDraw! does not accept the
string of the Printer Port as
PASSTHRU (continued).
For example, to configure a text printer
named 4517 on physical port 1 using
TCP Port 3001, type:
CHANGE SERVICE 4517 3001 FILTER
ENABLED TELNET DISABLED PORT 1
Note: The above command is typed all
on one line; do not type a <cr> until all
information (shown on two lines above)
is entered.
Note: The TCP Port specified (3001) is
required mainly for syntactical purposes
to define a new TCP/IP service. The LPD
protocol will still use TCP Port 515.
However, any print jobs sent to TCP
Port 3001 will also utilize the 4517
service and be directed to physical
port 1.
5. Log out of the XNIC telnet session by
entering logout.
6. Create a new printer from the Program
Manager. In Step 10, the new input for
B will be the new Queue Name (e.g.,
4517).
Table 11.6 Windows NT Problems (continued)
Problem Possible Causes Corrective Actions
ETR-CH11 Page 27 Thursday, October 24, 1996 7:14 AM