User guide
Troubleshooting
Chapter 11: Troubleshooting ❖ 11-13
EtherTalk
Problems
If your Macintosh jobs will not print and an Out of memory
message is displayed on the Mac screen, an incorrect printer
type was selected under the Chooser menu. The
LaserWriter printer type should be selected.
For installing a Macintosh printer on the Ethernet network:
To select EtherTalk or TokenTalk:
To set up the printer:
1
Select the apple icon from the menu bar at the top of the
screen.
2
Select the Control Panel option.
3
Select Network.
4
Select EtherTalk or TokenTalk.
1
Select Chooser from the Apple menu.
2
Click the OnPage icon (or the LPS equivalent.).
3
If the AppleTalk Active button isnt already on, click the
Active button to turn AppleTalk On, and restart you
computer.
4
If your network administrator has divided your AppleTalk
network into zones, click the zone that includes your printer.
All the AppleTalk printers that are on your network (or in the
current zone) will appear in a list box.
5
Select the name of your printer.
6
Click the Setup button.
ETR-CH11 Page 13 Thursday, October 24, 1996 7:14 AM