User guide

Setting Optional Configurations (TCP/IP Only)
Chapter 8: Using the Printer with LAN Server ❖ 8-23
4
At the Password>> prompt, hit <Backspace>. Then enter
the password.
The default password is system. You will not see what you
enter.
After the password is entered, the Local> prompt is
redisplayed and you can enter server commands.
Refer to Table 8.2 XNIC tasks and commands (page 8-26)
for a list of basic commands.
5
To end the connection, enter:
logout
ETR-CH08 Page 23 Wednesday, October 23, 1996 9:46 PM