User guide

Using the Printer with LAN Server
Chapter 8: Using the Printer with LAN Server ❖ 8-19
Changing
Printer
Properties
(TCP/IP or
NetBIOS)
To change printer properties, begin from the Xerox LAN Server
Printer Utility folder on your desktop.
1
Double click on the Xerox LAN Server Printer Utility folder
icon on the LAN Server desktop.
This displays the LAN Server Printer Utility window.
2
Double click on the Xerox LAN Server Printer Utility icon.
3
Select an existing printer to modify from the pop-up window.
4
Pull down the Install menu.
5
Click on Change Printer Properties.
6
Depending upon which queue you have selected to modify,
either the TCP/IP Protocol or NetBIOS Protocol screen will
appear.
 If you are modifying a TCP/IP queue, continue with the
next step.
 If you are modifying a NetBIOS queue, go to step 11.
7
If you selected a TCP/IP printer, the TCP/IP RPRINT Printer
Properties screen is displayed on your screen.
8
Change the Service Name, IP Address, or Port Number, as
needed.
9
Click More >>> to view the Advanced Options screen.
Make any needed changes.
10
Click OK to save the changes.
This saves your modifications to the TCP/IP printer.
11
If you selected a NetBIOS printer, the Change NetBIOS
Printer Properties screen is displayed on your screen.
12
Change the Service Name or Server Name, as needed.
ETR-CH08 Page 19 Wednesday, October 23, 1996 9:46 PM