User guide

Configuring LAN Server for TCP/IP or NetBIOS
Chapter 8: Using the Printer with LAN Server ❖ 8-15
4
Select a printer Driver.
The Xerox OS/2 driver that you installed earlier should
appear in this field.
Select the Xerox OS/2 driver for your printer.
To add additional drivers to the Xerox LAN Server
Printer Utility driver list, install a new printer under the
OS/2 Print Manager and select the desired driver for
the new printer.
5
Enter the Server Name.
This is the XNIC Server Name (XNExxxxxx for XNIC-ENET
or XNTxxxxxx for XNIC-TRING).
Refer to Before Installation (page 8-8) where you wrote this
earlier.
6
Enter the Service Name.
This is the XNIC Printer Name (XNExxxxxx_1 for
XNIC-ENET or XNTxxxxxx_1 for XNIC-TRING).
Refer to Before Installation (page 8-8) where you wrote this
earlier.
ETR-CH08 Page 15 Wednesday, October 23, 1996 9:46 PM