User guide
Configuring LAN Server for TCP/IP or NetBIOS
8-12 ❖ XNIC-ENET/TRING Configuration Guide
6
Enter the IP Address.
This is the XNIC IP Address
For example: 138.236.99.26).
Refer to Before Installation (page 8-8) where you wrote this
earlier.
7
Enter the Port Number: 2501
This is the TCP port number associated with the printer port
on the XNIC.
8
Click on More >>> to optionally modify timing parameters.
This opens the Advanced Options window.
Table 8.1 Advanced printer properties options (page 8-13)
lists these options and describes their purposes.
Select any desired options.
Click OK when you have entered your options.
This returns you to the Add New TCP/IP RPrint Printer window.
ETR-CH08 Page 12 Wednesday, October 23, 1996 9:46 PM