User guide

Configuring LAN Server for TCP/IP or NetBIOS
8-10 ❖ XNIC-ENET/TRING Configuration Guide
3
Double click on the Xerox LAN Server Printer Utility icon to
display the LAN Server Printer Utility window.
4
Pull down the Install menu on the LAN Server Printer Utility
window.
Select Add Printers
This window will appear.
5
Select one of these two protocols:
 TCP/IP Protocol
 NETBIOS Protocol.
Depending upon your choice, you should see one of these
two windows on your display:
 Add New TCP/IP RPrint Printer window
 Add New NetBIOS Printer window.
6
If you selected TCP/IP, refer to Creating a TCP/IP
Print Queue (page 8-11) to continue the printer installation.
If you selected NetBIOS, refer to Creating a NetBIOS
Print Queue (page 8-14) to continue the printer installation.
ETR-CH08 Page 10 Wednesday, October 23, 1996 9:46 PM