User guide

Configuring LAN Server for TCP/IP or NetBIOS
Chapter 8: Using the Printer with LAN Server ❖ 8-9
Creating a Print
Queue on the
File Server
3
Enter the following at the command prompt in the OS/2
window:
a:\LANsvr\install
This displays the Installation Screen.
4
Click the Install LAN Server button.
The Install program will create the Xerox LAN Server Utility
folder.
5
A completion message will appear when the installation is
finished.
6
Click on OK.
If you would like to see a list of the files that were
installed on your hard disk, refer to the Readme icon in
the Xerox LAN Server Printer Utility folder.
7
Remove the diskette from the floppy drive.
You are now ready to create print queues on the file server
which is discussed in the next section.
1
Install the Xerox OS/2 driver (for PCL or PostScript) shipped
with your printer. This is done via the OS/2 Print Manager.
2
Double click on the Xerox LAN Server Printer Utility folder on
the LAN Server desktop.
This displays the LAN Server Printer Utility - Icon View
window.
ETR-CH08 Page 9 Wednesday, October 23, 1996 9:46 PM