User guide

Using the Printer with LAN Server
8-8 ❖ XNIC-ENET/TRING Configuration Guide
Configuring
LAN Server
for TCP/IP
or NetBIOS
The Xerox LAN Server Printer Utility Program provided on the
Utilities for: LAN Server, LAN Manager, Novell NetWare (TES)
diskette will be installed on the LAN Server file server. It allows
you to configure the file servers and clients for TCP/IP or
NetBIOS printing.
The XNIC can receive multiple print jobs from file servers and
clients, simultaneously printing via TCP/IP and NetBIOS.
Sixteen printer queues can be created on the same file server.
The same XNIC can accept jobs from all these queues.
Before
Installation
We recommend that you write these values from the Printer
Configuration Sheet or the Network Interface Configuration
sheets before you begin:
 XNIC Server Name: XNExxxxxx (for XNIC-ENET) or
XNTxxxxxx (for XNIC-TRING)
where xxxxxx is the last six characters of the XNIC hardware
address. Upper and lower case letters arent important.
 XNIC Printer Name: XNExxxxxx_1 or XNTxxxxxx_1
which is the XNIC Server Name followed by an underscore
_ and a 1.
 IP Address: yyy.yyy.yyy.yyy
(Required only if running TCP/IP)
 TCP Port: 2501
(Required only if running TCP/IP).
Installation
from the
Diskette
1
Insert the Utilities for: LAN Server, LAN Manager, Novell
NetWare (TES) diskette into the floppy drive on the LAN
Server file server.
2
Open an OS/2 window.
ETR-CH08 Page 8 Wednesday, October 23, 1996 9:46 PM