User guide

The Telrcf Utility (Optional)
Chapter 7: Using the Printer with LAN Manager ❖ 7-21
Using the Telrcf
Script Facility
Telrcf may be used to execute XNIC command scripts for
remotely configuring your XNIC. Telrcf is especially useful if you
want to configure many XNIC servers remotely from your LAN
Manager host. Refer to the XNIC tasks and commands tables in
each chapter of this guide for specific XNIC commands.
To execute scripts, Telrcf should be run directly from an OS/2
window. To do this, open an OS/2 window and
cd to the \xerox
directory. For information on the telrcf options type telrcf without
any arguments and the program will display a list of its runtime
arguments.
To see an example of a telrcf script file, enter:
type script.txt
Use a text editor to create a script file in a form similar to the
sample. You may use any valid XNIC command in your script to
set or display any XNIC parameters.
To send a telrcf configuration script file named 
servcnfg.scr”
to an XNIC with IP address 138.239.1.2:
1
At the OS/2 prompt, enter:
telrcf 138.239.1.2 -f servcnfg.scr
2
The commands in the script will be echoed to the screen.
When the script execution completes, press:
<Ctrl> <Break>.
ETR-CH07 Page 21 Wednesday, October 23, 1996 9:41 PM