User guide

Using the Printer with LAN Manager
7-20 ❖ XNIC-ENET/TRING Configuration Guide
The Telrcf
Utility
(Optional)
The telrcf utility allows you to log into any XNIC with a valid IP
address from any host terminal on the network. The Telrcf utility
is automatically installed along with the other LAN Manager files
from the Utilities for LAN Server, LAN Manager, Novell NetWare
(TES) diskette. You need only to configure Telrcf for your
application.
Configuring
Telrcf
The following steps configure Telrcf for a single connection. You
may use this procedure to configure multiple connections.
For example, to set up an icon for an interactive session, use the
following procedure:
1
Open the Xerox LAN Manager Printer Utility window and
select the TelRcf icon.
2
Pull down the Program menu and select Copy.
3
In the Copy Program window, enter a name in the Change
title to: field.
4
Click on the Copy button to create a new icon.
5
Select your new icon.
Next, pull down the Program menu and select Properties to
open the Properties window.
6
Enter the XNIC IP address in the Parameters box.
7
Select either OS/2 Full Screen or OS/2 Window.
8
Click the Change button to close the window.
Telrcf is configured and ready for an interactive session.
ETR-CH07 Page 20 Wednesday, October 23, 1996 9:41 PM