User guide

Configuring LAN Manager for TCP/IP or NetBIOS
Chapter 7: Using the Printer with LAN Manager ❖ 7-15
4
Select a printer Driver.
The Xerox OS/2 driver that you installed earlier should
appear in this field.
Select the Xerox OS/2 driver for your printer.
To add additional printer drivers to the Xerox LAN
Manager Printer Utility driver list, install a new printer
driver from the OS/2 Print Manager and select the
desired driver for the new printer.
5
Enter the Server Name.
This is the XNIC Server Name
For example: XNE1076E3 for XNIC-ENET or XNT88E829 for
XNIC-TRING.
Refer to Before Installation (page 7-7) where you wrote this
earlier.
6
Enter the Service Name.
This is the XNIC Printer Name (XNExxxxxx_1 or
XNTxxxxxx_1).
Refer to Before Installation (page 7-7) where you wrote this
earlier.
ETR-CH07 Page 15 Wednesday, October 23, 1996 9:41 PM