User guide

Configuring LAN Manager for TCP/IP or NetBIOS
Chapter 7: Using the Printer with LAN Manager ❖ 7-11
4
Select a printer Driver.
The Xerox OS/2 driver that you installed earlier should
appear in this field.
Select the Xerox OS/2 driver for your printer.
To add additional printer drivers to the Xerox LAN
Manager Printer Utility driver list, install a new printer
driver from the OS/2 Print Manager and select the
desired driver for the new printer.
5
Enter the Service Name.
This is the XNIC Printer Name
For example: XNE1076E3_1 for XNIC-ENET or
XNT88E829_1 for XNIC-TRING.
Refer to Before Installation (page 7-7) where you wrote this
earlier.
6
Enter the IP Address.
This is the XNIC IP Address (For example: 138.236.99.26).
Refer to Before Installation (page 7-7) where you wrote this
earlier.
7
Enter the Port Number: 2501
This is the TCP port number associated with the printer port
on the XNIC.
ETR-CH07 Page 11 Wednesday, October 23, 1996 9:41 PM