User guide
Configuring LAN Manager for TCP/IP or NetBIOS
7-8 ❖ XNIC-ENET/TRING Configuration Guide
Installation from
the Diskette
You are now ready to create print queues on the file server
which is discussed in the next section.
1
Insert the Utilities for: LAN Server, LAN Manager, Novell
NetWare (TES) diskette into the floppy drive on the LAN
Manager file server.
2
Open an OS/2 window.
3
Select the drive where you inserted the diskette.
For example, A:
4
Run the installation program.
For example, if the diskette is in the A drive, enter:
A:\LANMAN\install
This displays the Installation Screen.
5
Click on Install LAN Manager button.
6
Enter the directory where the files will be installed.
The default is: C:\Xerox
7
Click the Install box.
The Install program will create the necessary icons.
8
When you see the completion message, click OK.
If you would like to see a list of the files that were installed on
your hard disk, refer to the Readme icon in the Xerox LAN
Manager Printer Utility folder.
9
Remove the diskette from the floppy drive.
ETR-CH07 Page 8 Wednesday, October 23, 1996 9:41 PM