User guide
Using the Printer with LAN Manager
Chapter 7: Using the Printer with LAN Manager ❖ 7-7
Configuring
LAN
Manager
for TCP/IP
or NetBIOS
The Xerox LAN Manager Printer Utility Program provided on the
Utilities for: LAN Server, LAN Manager, Novell NetWare (TES)
diskette will be installed on the LAN Manager file server. It
allows you to configure the file servers and clients for TCP/IP or
NetBIOS printing.
The XNIC can receive multiple print jobs from file servers and
clients, simultaneously printing via TCP/IP and NetBIOS.
Sixteen printer queues can be created on the same file server.
The same XNIC can accept jobs from all these queues.
Before
Installation
We recommend that you write these values from the Printer
Configuration Sheet or the Network Interface Configuration
sheets before you begin:
XNIC Server Name: XNExxxxxx (for XNIC-ENET) or
XNTxxxxxx (for XNIC-TRING)
where xxxxxx is the last six characters of the XNIC hardware
address. Upper and lower case letters arent important.
XNIC Printer Name: XNExxxxxx_1 or XNTxxxxxx_1
which is the XNIC Server Name followed by an underscore
_ and a 1.
IP Address: yyy.yyy.yyy.yyy
(Required only if running TCP/IP)
TCP Port: 2501
(Required only if running TCP/IP).
ETR-CH07 Page 7 Wednesday, October 23, 1996 9:41 PM