User guide

Setting Optional Configurations
5-36 ❖ XNIC-ENET/TRING Configuration Guide
4
At the Password>> prompt, enter the password.
The default is system. You will not see what you type.
On certain hosts, you must press the Backspace key
before you can enter the password.
For example: <Backspace> system.
After the password is entered, the Local> prompt is
redisplayed and you can then enter XNIC commands.
See Table 5.2 on page 5-39 for a list of basic commands.
5
To end the Telnet connection, enter:
logout
Etr-ch05 Page 36 Thursday, October 24, 1996 7:31 PM